Substrate | Note | Adhesives | | Acetel (Delrin) | D | Epoxy, Contact Cement | | Acetate | | Cellulose Nitrate, Nitrile, Polyester, Urethane | | Acrylic | | Methylene Chloride, Weldon 40 | | Melamine | | Epoxy, Contact Cement, Neoprene, Polyester | | Nylon | D | Epoxy, Contact Cement, Neoprene, Weldon 1701 | | Polycarbonate | | Methylene Chloride | | Polyethylene | D | Epoxy, Contact Cement, Natural or Synthetic Rubber | | Polypropylene | D | Epoxy, Contact Cement, Natural or Synthetic Rubber | | Polyurethane | | Epoxy, Nitrile, Urethane, Polyester | | Polystyrene | | Epoxy, Contact Cement, Methylene Chloride | | PolyVinyl Chloride (PVC) | | Methyl Ethyl Ketone, Weldon 10, VLP, Vynabond | | Teflon (Acid Etched) | D | Epoxy, Contact Cement | | Note: "D" means the substrate is difficult to bond. . . the natural waxy surface of these plastics makes gluing even with the recommended adhesives, somewhat less than perfect. The surface of these plastics must be roughed up to allow the adhesive the best possible "tooth" on the surface. Even so don't expect these materials to edge glue well. Some can be effectively hot air welded. |
|
