HYDROCAL WHITE

A good general use product that offers a gradual setting time and a long period of plasticity. Recommended for solid and hollow casting of lamp bases and figurines. Designed for thin sections, which require high green strength to minimize breakage during removal from an intricate latex mold.

Hydrocal White is a gypsum cement with a use consistency of 45 lbs. of water to 100 lbs. of plaster. It can be carved or added to. It has a setting expansion twice that of molding, casting or pottery plaster. 50 lb bag

HYDRO-Stone

Hydro-Stone is a gypsum cement that is hard and strong, especially suitable where high strength and resistance to water absorption are necessary. It cannot be worked under a template. Used in high-quality art novelty and statuary castings. Should not be cast in glue molds, but works well in plaster and other flexible molding compounds. It is mixed at a ratio of 32 parts of water to 100 parts of hydro-stone by weight. 50 lb Bag

HYDROCAL FGR=95

Hydrocal FGR-95 is a fast-setting, high early-strength product designed for use in casting exterior statuary. It produces strong, hard casts, and, when mixed properly, can be poured into a mold to reproduce many originals. This is an ideal product (when combined with fiberglass mat) for making mother molds. TCS mold-makers are using this almost exclusively for their mother molds. 50 lb Bag

ULTRACAL 30

Ultracal 30 is a gypsum cement which has a high compressive strength and surface hardness. It is mixed at a ration of 38 parts of water to 100 parts of Ultracal 30. 50 lb Bag