T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.

Recommended Uses:
For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35°F. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface.

Package Sizes:
(Each kit contains 1-part resin and 1-part hardener)
Quart kit (1100K16)
Half-gallon kit (1100K20)
Gallon kit (1100K24)
Two-gallon kit (1100K50)
8.4oz u-TAH™ Cartridge (1100K91)

Available Colors:
Amber, all sizes; Black: Gallon kits and larger (special order in the u-TAH Cartridge).