Products

Polyurethane Pour in Place Foam is a two component liquid material that, when mixed together, will expand to approximately 25 times its volume at 21 deg C. It has a density of 2 lb. per cubic foot and is used to fill cavities and voids, insulation for tanks and holds, and as floatation for docks, etc.

• This two-part liquid, expanding rigid urethane foam is a closed cell, pourable foam, which will resist the absorption of water.
• The densities shown refer to the weight per cubic foot of expanded foam (12" x 12" x 12").
• Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
• This product can be poured in multiple layers with excellent bonding between layers.
• All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above.
• Accurate measuring of these products is extremely critical.