Home > Products > PAINTS > Removall > Flooring Adhesive Remover
Removall
Flooring Adhesive Remover
Why mess with the nasty smell of solvents? Here's the easy way to get rid of the black mastic, carpet underlayment, contact cement, foam tape, or even adhesive label residue.
Features and Benefits
Works on the toughest adhesives including black mastic
Easy to use, cleans up with water
Low odor - NO METHYLENE CHLORIDE
Non-abrasive, water based formula
Safe - NON FLAMMABLE, NO PHOSPHATES, NO CHLORINE
TEST PATCH: A test area will indicate whether the product will adversely affect floor finish or project surface.
Some sub-floors are moisture sensitive and may swell when rinsed with water.
PREPARATION:
Remove all loose carpet and under pad and other debris from floor prior to using product
DO NOT DILUTE product
COVERAGE: Approximately 100 sq.ft. per US gallon (2.5 sq. m. per L)
DIRECTIONS:
1) Apply product to the floor by pouring it out and spreading with a roller, brush, mop, sponge or rag. Ensure that sufficient product is being used to thoroughly penetrate the mastic, under pad or glue residue.
2) When removing linoleum, precut the surface into approximately 2 inch or 5 cm squares to allow product to
penetrate to the glue beneath.
3) Leave 15 minutes or until glue is soft. For tougher ceramic tile mastics, a longer dwell time may be required and agitation with a stiff brush will hasten the penetration.
4) Remove softened glue with a scraper, squeegee, pressure washing or wet vacuum suction.
5) Repeat procedure on stubborn areas, if required.
6) Wash the stripped floor with water to remove residue and let surface dry before putting new flooring down.