Home > Products > PAINTS > Marine Coatings > Pacific Sailor > Vinco Antifouling Paint
Pacific Sailor
Vinco Antifouling Paint
Pacific Sailor Vinco Antifouling paint is a high quality
copper based antifouling coating. It may be used directly on wood or fibreglass
hulls to reduce marine fouling.it may also be used on metal hulls id used in
conjunction with an anticorrosive coating such as Swiftsure Silver
Anticorrosive.
Preparation:
Wooden Hulls: Sand smooth and make sure all seams are
properly caulked.All exposed metal should be coated with one coat of Swiftsure
Anticorrosive and allowed to dry. Apply a coat of antifouling thinned to 10- 15%
with reducer and allow to dry for 6 hours.Apply 2 more coats at full strength
allowing 4 hours between coats.
Fiberglass Hulls: Sand to remove traces of wax or parting
agents.make sure all glossy areas are sanded. Apply the antifoulant directly to
the surface.If a smoother finish is required apply a primer coat of FRP primer
before the antifoulant.
Mixing: Stir thoroughly from the bottom of the can.
Application: May be applied with brush or roller, two coats
recommended.
Dry Time: Four hours between coats and two hours minimum
before re-launch.