Products

Home > Products > PAINTS > Architectural Coatings > PENOFIN > Premium Red Label

PENOFIN

Premium Red Label

Ultra Premium Red Label Wood Finish

Ultra Premium Red Label Wood Finish is formulated for all wood species.

• 99% ultraviolet protection via transoxide pigments.
• Added high-grade mildewcide.
• Great for decks, siding, fences, gazebos, outdoor furniture, boats, docks, or any wood structure in a harsh weather environment.
• Never any sanding or stripping required!

Red Label Wood Finish Colors is available in six transparent tones.

Red Label Wood Finish Application Tips

· SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending agents.

· Apply Penofin to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when wood is hot to the touch).

· Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penofin.

· For maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface removing any excess product.

· Surface will be dry to the touch in three hours and ready for use in 12 hours

· When using the one-coat formula, the application is now complete.

· If using the two-coat formula, wait a minimum of three hours and apply a light second coat and again wipe any excess from the entire application area.

Product Performance

Expect 3-5 years on vertical surfaces, 1-2 years on horizontal surfaces depending on use and weather exposure.

Maintenance

• When you use Penofin, maintenance is a snap. Because Penofin is a low-solid product, there is no stripping or sanding necessary. Simply wash the surface with water and a mild detergent. Allow your wood surface to dry completely, approximately 48 hours before application.

Coverage

Coverage depends on application method, texture, and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

Cleanup

• Penofin is an oil-based product. Clean brushes and other application materials with mineral spirits or paint thinner.
• AVOID SPONTANEOUS COMBUSTION of oily rags. Soak all used cloths in a covered metal bucket of water, ensuring the cloths are completely covered with water. Cover until they can be properly disposed at your local hazardous materials drop-off.

MSDS Click Here